Faq - www.envizendigital.com

Knowledge Center

Move
Close

NOTE: You cannot control the source device with the Display Receiver. This may only be accomplished at the source device.

Black screen without any video image displayed

1.Please make sure if the Transmitter module and Receiver are both connected to the DC power and with the power turned "ON"; 2.Make sure that the battery of the Display Receiver is fully charge and the unit is powered on when the wall plug is not in use; 3.Please make sure if the Transmitter module and Receiver are paired correctly (See Appendix).

Skipping video image, or frozen video image

Please make sure that the Home Roam Display Receiver unit is not too far away from Transmitter Module unit, preferably within 100 feet away from each other.

Jittery screen display, clipped video and audio

1.Please make sure that the video broadcast / playback format of the source device conforms to NTSC format. 2.Make necessary adjustment to the source device.

Video is displayed without audio

1.Press the button on the Display Receiver to select the corresponding source connected to the Transmitter Module; 2.Verify audio connections to both Transmitter Module and Display Receiver are matched; 3.The A/V connection cable between Source Device and the Transmitter Module unit is completely inserted into the socket at both end; 4.Verify the quality of the A/V cable by switching to a different A/V cable; 5.Adjust the volume of the Display Receiver to a comfortable level; 6.Restart both the Transmitter Module and the Display Receiver by a power off/on cycle.

Blue Screen is displayed with only audio coming through

1.Press the button on the Display Receiver to select the corresponding source connected to the Transmitter Module; 2.Verify video connections to both Transmitter Module and Display Receiver are matched; 3.The A/V connection cable between Source Device and the Transmitter Module unit is completely inserted into the socket at both ends; 4.Verify the quality of the A/V cable by switching to a different A/V cable; 5.Restart both the Transmitter Module and the Display Receiver by a power off/on cycle.